4ft Series – Rib Stone Rollers
Our 4ft series are our most popular roller, easily managed with 100-200 hp front wheel assist tractors (depending on soil conditions) & are a manageable weight for transporting.
Below are the specifications & options, all rollers are customised & manufactured to the customer’s requirements.
Standard Features: 4ft Series
Barrel: 25mm. Other sizes available on request
Baffles Internal: 25mm plate 3 run 3-layer weld
Bearings: Spherical roller with double lip CR seal
End Plates: 25mm plate.
Front Hitch Assembly: HD cushion hitch
Jockey Stand: HD Side winding stand
- Flat: 50 x 20 mm flat mild steel continuously welded both sides
- Angle Iron: 50x50x8 mm angle iron continuously welded both sides
Roller frame: 180 mm channel extends continuously around for extra support with a central brace
- Adjustable for use with flat ribs 50 x 25 adjustable scrapers set on the underside or rear chassis to remove any obstructions in the ribs
- Fixed scrapers for use with angle iron ribs 25 mm reo bar welded into place
Sockets: 2 x 2” sockets
Stub Axels HD: bolt on 90 mm 4140 Shaft
Weight: Empty approx. 7 ton full with water approx. 12 ton
Width: roller widths can vary, however 16 ft is an ideal length for most applications
Delivery with our drop deck trailer we have the ability to deliver your new roller. Delivery is to be discussed at ordering, permits can be obtained if required & rollers delivered to the customer (most requiring 2 pilot vehicles)
Hard Facing welded onto each flat rib
Oversize sign mounted at the rear